NETGEAR READYNAS 2120, READYNAS 3220, READYNAS 4220 - page 22

ReadyNAS 3220 and 4220
22
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems
The system powers on.
4. Continue to press the Reset button until the Power, UI, and Health LEDs are blinking.
Note: It takes approximately one minute for the system to enter boot mode.
5. Press and release the Reset button to scroll through the boot menu modes.
The storage system shows the boot mode options using the LEDs, as described in the
following table:
Boot Mode Status Indicator
Description Power
LED UI LED Health
LED
Boot menu Power, UI, and Health LEDs blink.
Normal Health LED lights.
Factory default UI LED lights.
OS reinstall UI and Health LEDs light.
Tech support Power LED lights.
Volume read only Power and Health LEDs light.
Memory test Power and UI LEDs light
Test disk Power, UI, and Health LEDs light.
Legend:
•Solid: 
•Blinking: 
•Off: 
6. Press and hold the Reset button to confirm your boot menu selection.
The system boots in the selected boot mode.







