NETGEAR READYNAS 2120, READYNAS 3220, READYNAS 4220 - page 37

Disks
37
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems
2. Pull out the disk tray.
3. Remove the screws and the old 2.5-inch HDD or SSD from the tray.
4. Place the new 2.5-inch HDD or SSD in the disk tray.
5. Secure the drive in the tray using the screws.
Make sure that the hard disk connectors face the interior of the disk tray when you
assemble the disk.
6. Slide the disk tray back into the drive bay of the system.
7. Press the disk tray handle until it latches closed.
The disk tray is secured in the drive bay.
If the volume that contained the failed disk uses a protected RAID configuration, the
system automatically resynchronizes the volume using the new disk. Resynchronization