Appendix B
Connector Pin Assignments
This appendix provides information about the RJ-45 connector used for the NETGEAR Model SW108 Ethernet switch.
RJ-45 Plug and vista RJ-45 Connector
The RJ-45 plug accepts 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) 100 Ω cable and connects into the vista RJ-45 connector.
The vista RJ-45 connector (also referred to as a 10 Mbps port) is used to connect stations, hubs, and switches through UTP cable and supports 10 Mbps data transmission.
The RJ-45 plug and vista RJ-45 connector are both illustrated in Figure B-1.
12345678
8 1
711EA
Key:
1 to 8 = Pin numbers
Figure B-1. RJ-45 plug and vista RJ-45 connector with built-in LEDs
Connector Pin Assignments | B-1 |
