ASSEMBLY
Steering Wheel 
Wire with Connector
Turn Signal
7
•Position the turn signal with the hollow side down.
•Fit the wire with connector on the end of the steering wheel through the center of the turn signal.
•Fit the turn signal onto the steering wheel.
Motor Harness
Connector
Steering Wheel
Connector
8 | DASH VIEW |
|
•Plug the motor harness connector from the vehicle into the steering wheel connector.
Steering
Column
End of Steering Column
Lock Nut
10
•Fit the remaining lock nut onto the end of the steering column.
•Tighten the lock nut with the assembly tool.
Steering
Wheel Cap
11
•“Snap” the steering wheel cap into the center of the steering wheel.
9
•While carefully feeding the wire down into the dash, fit the steering wheel onto the end of the steering column.
9 |
