ASSEMBLY
Pull
3 | DASH VIEW |
|
•Insert two #8 x ¾" screws straight into the dash, as shown. Tighten the screws.
Hint: If the screw holes in the dash do not align with the vehicle, place a finger in the steering wheel opening in the dash. Pull the dash toward the back of the vehicle to reposition it.
Steering Column
4 | BOTTOM VIEW |
|
•Turn the vehicle over.
•Remove the protective caps from the ends of the steering column and throw them away.
•Fit the straight end of the steering column down through the hole in the dash.
Lock Nut
End of Steering
Column
Steering Linkage
5
•Fit the end of the steering column through the hole in the steering linkage.
•Fit a lock nut onto the end of the steering column.
•Tighten the lock nut with the assembly tool.
Steering Column Cover
6
•Place the steering column cover over the lock nut and push to "snap" it into the steering linkage.
•Turn the vehicle upright.
8 |
