NETGEAR manual First, Set Up the WG102, Deploy the WG102, Now, Verify Wireless Connectivity

Models: WG102

1 2
Download 2 pages 31.24 Kb
Page 1
Image 1

)NSTALLATION 'UIDE

NETGEAR WG102 ProSafe 802.11g Wireless Access Point

Start Here

Please refer to the Reference Manual on your Resource CD for instructions on advanced configuration options.

Estimated Completion Time: 30 minutes.

Tip: Before mounting the WG102 in a high location, first set up and test the WG102 to verify wireless network connectivity.

First, Set Up the WG102

1. Connect the wireless access point to your computer.

e. Turn on your computer, connect the power adapter to the WG102 and verify the

following:

Power: The power light should be lit. If the power light is not lit, check the

connections and check to see if the power outlet is controlled by a wall

switch that is turned off.

Test: The test light blinks when the WG102 is first turned on.

LAN: The LAN light on the WG102 should be lit (amber for a 10 Mbps

connection and green for a 100 Mbps connection). If not, make sure the

Ethernet cable is securely attached at both ends.

Wireless: The WLAN light should be lit.

2. Configure LAN and wireless access.

a. Configure the WG102 Ethernet port for LAN access.

• Connect to the WG102 by opening your browser and

entering http://192.168.0.229 in the address field.

Deploy the WG102

1.Disconnect the WG102 and position it where you will deploy it. The best location is elevated, such as wall mounted or on the top of a cubicle, at the center of your wireless coverage area, and within line of sight of all the mobile devices.

2.Position the antenna. Vertical positioning provides best side-to-side coverage. Horizontal positioning provides best top-to-bottom coverage.

3.Connect an Ethernet cable from your WG102 Access Point to a LAN port on your router, switch, or hub.

4.Connect the power adapter to the wireless access point and plug the power adapter in to a power outlet. The PWR, LAN, and Wireless LAN lights should light up.

Tip: The WG102 supports Power Over Ethernet (PoE). If you have a switch that provides PoE, you will not need to use the power adapter to power the WG102. This can be especially convenient when the WG102 is installed in a high location far away from a power outlet.

Now, Verify Wireless Connectivity

a.

Unpack the box and verify the contents.

b.

Prepare a PC with an Ethernet

 

 

adapter. If this PC is already part

A

 

of your network, record its

 

 

 

TCP/IP configuration settings.

 

 

Configure the PC with a static IP

 

 

address of 192.168.0.210 and

 

 

255.255.255.0 as the Subnet Mask.

 

c.

Connect an Ethernet cable from

 

 

the WG102 to the PC (point A in

 

 

the illustration).

&RPSXWHU

 

 

d.Securely insert the other end of the cable into the WG102 Ethernet port (point B in the illustration).

%OXH1(7*($5

&DEOH

B :*



(WKHUQHW

3RUW

 

• When prompted, enter admin for the user name and

 

password for the password, both in lower case letters.

 

• Click the Basic Settings link and configure the IP Settings for your network.

b.

Configure the wireless interface for wireless access. See the online help or the

 

Reference Manual for full instructions.

c.

Test wireless connectivity using a PC with a wireless adapter configured

 

according to the wireless settings you just set in the WG102 to establish a

 

wireless connection to the WG102.

Now that you have finished the setup steps, you are ready to deploy the WG102 in your network. If needed, you can now reconfigure the PC you used in step 1 back to its original TCP/IP settings.

Using a computer with an 802.11g or 802.11b wireless adapter, verify connectivity by using a browser such as Netscape® or Internet Explorer to connect to the Internet, or check for file and printer access on your network.

Note: If you cannot connect, see to Troubleshooting Tips in this guide or the Reference Manual on the Resource CD for ProSafe Wireless Access Point.

Page 1
Image 1
NETGEAR manual First, Set Up the WG102, Deploy the WG102, Now, Verify Wireless Connectivity

WG102 specifications

The NETGEAR WG102 is a robust and versatile wireless access point designed to enhance network connectivity in a variety of environments, from small businesses to larger enterprise settings. This device is well-regarded for its ease of use, reliable performance, and a feature set that caters to both basic and advanced networking needs.

One of the key features of the WG102 is its support for the IEEE 802.11g standard, which provides data rates of up to 54 Mbps. This makes it suitable for high-speed internet access and seamless data transfer for users connected to the network. Additionally, the WG102 is backward compatible with the 802.11b devices, ensuring that existing hardware can be integrated into the network without issues, thereby protecting investment in older technology.

The WG102 also excels in its deployment flexibility. With Power over Ethernet (PoE) support, installation becomes significantly easier, as the access point can receive power through the Ethernet cable, eliminating the need for additional power outlets. This feature is particularly advantageous in locations where power supply access is limited or where aesthetic considerations are key.

Security is a vital aspect of any network, and the WG102 does not disappoint. It supports Wi-Fi Protected Access (WPA and WPA2) for secure wireless communications, ensuring that user data is encrypted and protected from potential threats. The device also features WEP encryption, allowing users to implement various security measures based on their specific needs.

The WG102's management capabilities include a web-based interface, enabling administrators to configure settings easily and monitor network performance. The device supports VLAN tagging, which can help in segmenting network traffic for better performance and security. The ability to manage multiple access points through a single interface also streamlines network management.

In terms of physical characteristics, the NETGEAR WG102 is designed for durability and reliability. Its compact form factor allows for discreet installation, whether mounted on a ceiling, wall, or placed on surfaces.

Overall, the NETGEAR WG102 is a dependable access point that offers a combination of speed, security, and ease of management, making it an excellent choice for those looking to enhance their wireless networking capabilities.