NETGEAR WG111v3 user manual Placing the USB Adapter Cradle, Technical Support, April 20

Models: WG111v3

1 2
Download 2 pages 63.39 Kb
Page 2
Image 2
Placing the USB Adapter Cradle

Placing the USB Adapter Cradle

You can attach the WG111 Wireless USB 2.0 Adapter directly to a USB port on your computer, or use the USB cable to extend the range and obtain better wireless reception.

Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided in the package for better USB Adapter placement on a notebook computer:

1.The WG111 Wireless USB 2.0 Adapter comes with three black fasteners. Locate the one that has a prickly side and attach it to the plastic cradle on the middle of the outside rear.

2.Insert the WG111 Wireless USB 2.0 Adapter in the plastic cradle.

3.Place one of the other pieces of loop and hook fastener on the back of your monitor near the top for better reception.

Tip: Place the last piece of fastener on the side of monitor nearest your wireless access point.

4.Join the pieces of the fastener to attach the USB Adapter in the plastic cradle to the notebook or desktop monitor.

See the installation instructions for your operating system before attaching the USB cable to the USB Adapter and your computer.

Technical Support

Thank you for selecting NETGEAR products.

After completing the Smart Wizard configuration assistant, locate the serial number on the bottom label of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the website or over the phone is required before you can use our telephone support service. The phone numbers for worldwide regional customer support centers are on the Warranty and Support Information card that came with your product.

Go to http://kbserver.netgear.com for product updates and Web support.

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.

April 20, 2007

© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

Page 2
Image 2
NETGEAR WG111v3 user manual Placing the USB Adapter Cradle, Technical Support, April 20