Reference Manual for the 108 Mbps Wireless Firewall Router WGT624

Connecting the WGT624

This section provides instructions for connecting the 108 Mbps Wireless Firewall Router WGT624. Also, the 108 Mbps Wireless Router WGRT624 Resource CD (SW-10027-01)included with your router contains an animated Installation Assistant to help you through this procedure.

Connecting the Router

There are three steps to connecting your router:

1.Connect the router to your network

2.Log in to the router

3.Connect to the Internet

Follow the steps below to connect your router to your network. You can also refer to the 108 Mbps Wireless Router WGRT624 Resource CD (SW-10027-01)included with your router which contains an animated Installation Assistant to help you through this procedure.

1.Connect the wireless router to your network.

a.Turn off your computer and Cable or DSL Modem.

b.Disconnect the Ethernet cable (A) from your computer which connects to your cable or DSL modem.

A

Cable or DSL modem

Figure 3-1: Disconnect the cable or DSL Modem

c.Connect the Ethernet cable from your cable or DSL modem to the Internet port (A) on the WGT624.

 

 

 

3-4

Connecting the Router to the Internet

M-10153-01

Page 28
Image 28
NETGEAR manual Connecting the WGT624, Connecting the Router, Connect the wireless router to your network