Technical Specifications | NETGEAR WNDR4000, N750 instruction

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Technical Specifications

Table 2. WNDR4000 Router Specifications

Feature	Description

Data and routing protocols	TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
	and SMB

Power adapter	• North America: 120V, 60 Hz, input
	• UK, Australia: 240V, 50 Hz, input
	• Europe: 230V, 50 Hz, input
	• All regions (output): 12V DC @ 2.5A, output

Dimensions	1.1 in. x 6.89 in. x 4.68 in. (28 x 175 x 119 mm)

Weight	1.2 lbs. (0.5 kg)

Operating temperature	0° to 40° C (32º to 104º F)

Operating humidity	90% maximum relative humidity, noncondensing

Electromagnetic Emissions	FCC Part 15 Class B
	VCCI Class B
	EN 55 022 (CISPR 22), Class B C-Tick N10947

LAN	10BASE-T or 100BASE-Tx or 1000BASE-T, RJ-45

WAN	10BASE-T or 100BASE-Tx or 1000BASE-T, RJ-45

Wireless	Maximum wireless signal rate complies with the IEEE 802.11 standard. See the
	footnote for the previous table.

Radio data rates	Auto Rate Sensing

Data encoding standards	IEEE 802.11n draft version 2.0
	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
	IEEE 802.11n, IEEE 802.11a 5.0 GHz

Maximum computers per	Limited by the amount of wireless network traffic generated by each node
wireless network	(typically 50–70 nodes).

Operating frequency ranges	2.412–2.462 GHz (US)
2.4 Ghz	2.412–2.472 GHz (Japan)
	2.412–2.472 GHz (Europe ETSI)

Operating frequency ranges	5.18–5.24 + 5.745–5.825 GHz (US)
5 Ghz	5.18–5.24 GHz (Europe ETSI)
	FCC: 5.25–5.35 GHz (DFS band) and 5.47–5.725 GHz (DFS band)
	5600–5650MHz is disabled and unavailable for use
	CE (Europe ETSI): 5.25–5.35 GHz (DFS band) and 5.47–5.725 GHz (DFS
	band)

802.11 security	WPA-PSK, WPA2-PSK, and WPA/WPA2 Enterprise.

96 Appendix A. Supplemental Information

Image 96

NETGEAR N750 user manual Technical Specifications, WNDR4000 Router Specifications

Contents

N750 Wireless Dual Band Gigabit Router WNDR4000 Technical Support TrademarksStatement of Conditions Contents Content Filtering Settings Advanced Settings Appendix a Supplemental Information Hardware Setup Unpack Your Wireless Router Hardware FeaturesFront Panel Icon Description Back Panel Label Position Your Router Router Stand Cable Your Router Disconnect the modem from your computer Verify the Cabling Connect the modem to the router Hardware Setup Set Up Your Internet Connection Wireless Router Setup Preparation Use Standard TCP/IP Properties for DhcpReplace an Existing Router Gather ISP Information Log In to the Router Upgrade Firmware Router Interface Setup Wizard Manual Setup Basic Settings ISP does not require login ISP does require login Internet Service Provider Domain Name and MAC Address Fields Internet IP Address Change Password Unsuccessful Internet Connection Types of Logins To change the passwordLog Out Manually Wireless Settings Wireless Security Compatibility Wireless Security OptionsTurn Off Wireless Connectivity Security Basics Disable Ssid Broadcast Restrict Access by MAC AddressAdd Clients Computers or Devices to Your Network Manual Method Wi-Fi Protected Setup WPS Method WPS Button Method Wireless Settings Screen Consider Every Device on Your Network View or Change Wireless Settings To view or change wireless settings Wireless Settings Screen Fields Region Wireless Guest Networks Set Up WPA Security Option and PassphraseTo set up a wireless guest network Wireless Settings Content Filtering Settings Logs Activation and Administration Examples of Log Messages Keyword Blocking of Http Traffic Delete Keyword or Domain Block Services To block access to Internet servicesSpecify a Trusted Computer Content Filtering Settings Set the Time Zone Schedule Services Turn On Security Event Email Notification Port Forwarding Add a Custom Service To configure port forwarding to a local serverService Select Advanced Port Forwarding/Port Triggering To add a custom service Application Example Making a Local Web Server PublicTo make a local Web server public To set up port triggering Port Triggering Clear the Disable Port Triggering check box Content Filtering Settings Network Maintenance Upgrade the Firmware Automatic Firmware Check Manually Check for Firmware Upgrades To turn off the automatic firmware check at loginClear the Check for Updated Firmware Upon Log-in check box Stop the Automatic Firmware Check Manage the Configuration File Back Up Restore Internet Port SettingsView Router Status Erase Wireless Port LAN Port Local PortsShow Statistics Connection Status Port View Attached Devices USB Storage USB Drive Requirements File-Sharing ScenariosShare Photos within Your Home Network USB Storage Basic Settings Share Large Files with FTP over the Internet Basic Settings Screen Fields and Buttons Edit a Network Folder USB Storage Advanced Settings Access Method Unmount a USB Drive Create a Network Folder Approved USB Devices Connect to the USB Drive from a Remote ComputerSelect the Allow only approved devices check box Connect to the USB Drive with Microsoft Network Settings Access the Modem Router’s USB Drive Remotely with FTPSelect Maintenance Router Status Locate the Internet Port IP Address Configuring Windows 98SE and Windows ME Advanced Settings WAN Setup Default DMZ Server To assign a computer or server to be a default DMZ server To set up Dynamic DNS Select the Use a Dynamic DNS Service check boxDynamic DNS LAN Setup To change the LAN settingsLAN IP address LAN Setup Screen Settings IP Address ReservationTo reserve an IP address To edit or delete a reserved address entry Quality of Service QoS QoS for Internet Access Advanced Wireless Settings To view or change advanced wireless settings Wireless Advanced Settings 2.4 GHz and 5 GHz WPS SettingsWireless Card Access List Remote Management Access To configure your router for remote management Select the Turn Remote Management On check box Static Routes Static Route Example Add a Static Route Universal Plug and Play IPv6 Traffic Meter To monitor traffic on your wireless router Advanced USB Settings Wireless Bridging and Repeating Networks Advanced Settings Set Up a Repeater with Wireless Client Association To set up a repeater with wireless client association Advanced Settings Troubleshooting Power LED Wireless SettingsQuick Tips Sequence to Restart Your Network Troubleshooting with the LEDs Network SettingsPower LED Is Off or Blinking LEDs Never Turn Off Cannot Log In to the Wireless Router Wireless LED Is OffInternet or Ethernet Port LEDs Are Off Cannot Access the Internet To check the WAN IP address Changes Not Saved Incorrect Date or Time Wireless Connectivity Restoring the Factory Settings and PasswordWireless Signal Strength Factory Settings Feature Default Behavior DMZ Technical Specifications WNDR4000 Router Specifications Netgear Dual Band Wireless Regulatory Compliance InformationEurope EU Declaration of Conformity 1999/5/ΕΚ FCC Requirements for Operation in the United States FCC Information to User FCC Caution Industry CanadaImportant Note Radiation Exposure Statement Avertissement Index Index TCP/IP Wireless security 26 wireless security options