Manuals / Brands / Computer Equipment / Network Router / NETGEAR / Computer Equipment / Network Router

NETGEAR WNDR4300 The following table describes the LEDs, icons, and buttons on the front panel from left to right.

1 129

Download 129 pages, 3.52 Mb

9

N750 Wireless Dual Band Gigabit Router WNDR4300

The following table describes the LEDs, icons, and buttons on the front panel from left to right.

Icon Description

Power •Solid amber. The unit is starting up after being powered on.

•Solid green. The router is ready to use

•Off. Power is not supplied to the router.

•Blinking green. The firmware is corrupted. Visit http://www.netgear.com/support.

•Blinking amber. The firmware is upgrading, or the Restore Factory Settings button

was pressed.

Internet •Solid green. An IP address has been received; the router is ready to transmit data.

•Solid amber. The Ethernet cable connection to the modem has been detected.

•Off. No Ethernet cable is connected to the modem.

2.4 GHz •Solid green. The 2.4-GHz wireless radio is operating.

•Off. The 2.4-GHz wireless radio is off.

5 GHz •Solid blue. The 5-GHz wireless radio is operating.

•Off. The 5-GHz wireless radio is off.

LAN •Solid green. The LAN port has detected a 1 Gbps link with an attached device.

•Solid amber. The LAN port has detected a 10/100 Mbps link with an attached device.

•Off. No link is detected on this port.

USB •Solid green. The router has accepted the USB device.

•Blinking green. The USB device is in use.

•Off. No USB device is connected, or the Safely Remove Hardware button has been

clicked and it is now safe to remove the attached USB device.

Wireless

button

Pressing this button for over one second turns on and off the wireless radios.

•On. The 2.4-GHz and 5-GHz wireless radios are on.

•Off. The 2.4-GHz and 5-GHz wireless radios are off, and the 2.4 GHz and 5 GHz

LEDs are off.

WPS button Pressing this button allows you to use Wi-Fi Protected Setup (WPS) to add a wireless

device or computer to your network (see Wi-Fi Protected Setup (WPS) Method on

page 19). The WPS LED blinks for 2 minutes during this process.

Contents

Main Support Trademarks Contents Chapter 1 Hardware Setup Chapter 2 Getting Started with NETGEAR genie Chapter 3 NETGEAR genie Basic Settings Chapter 4 NETGEAR genie Advanced Home Chapter 5 Storage Chapter 6 ReadySHARE Printer Chapter 7 Security Chapter 8 Administration Chapter 9 Advanced Settings Chapter 10 Troubleshooting Appendix A Supplemental Information Appendix B Notification of Compliance Getting to know your router Unpack Your Router Hardware Features Front Panel The following table describes the LEDs, icons, and buttons on the front panel from left to right. Back Panel Label Attach the Stand Position Your Router Cable Your Router Page Verify the Cabling Connecting the router Router Setup Preparation Use Standard TCP/IP Properties for DHCP Gather ISP Information Wireless Devices and Security Settings Types of Logins and Access Use NETGEAR genie after Installation Upgrade the Firmware Dashboard (Basic Home Screen) Join Your Wireless Network Manual Method Wi-Fi Protected Setup (WPS) Method NETGEAR genie App and Mobile genie App Your Internet connection and network Basic Home Screen Internet Setup Internet Setup Screen Fields Attached Devices Parental Controls Page ReadySHARE Storage Basic Wireless Settings Wireless Settings Screen Fields Region Selection Wireless Network (2.4 GHz b/g/n and 5 GHz) Security Options Settings Change WPA Security Option and Password Guest Networks Guest Network Wireless Security Options WPA Encryption Specify custom settings NETGEAR genie Advanced Home Screen Setup Wizard WPS Wizard Setup Menu WAN Setup Default DMZ Server Change the MTU Size LAN Setup LAN Setup Screen Settings LAN TCP/IP Setup Use Router as a DHCP Server Address Reservation Use the Router as a DHCP Server Address Reservation Quality of Service (QoS) Setup Enable WMM QoS for Wireless Multimedia Applications Set Up QoS for Internet Access QoS for Applications and Online Gaming QoS for a Router LAN Port QoS for a MAC Address Edit or Delete an Existing QoS Policy Accessing and configuring a USB storage drive ReadySHARE Access File-Sharing Scenarios Share Photos Store Files in a Central Location for Printing Share Large Files over the Internet Storage Basic Settings Add or Edit a Network Folder Storage Advanced Settings Available Network Folders Safely Remove a USB Drive Media Server Specify Approved USB Devices Connect to the USB Drive from a Remote Computer Access the Router USB Drive Remotely Using FTP ReadySHARE Cloud Time Machine Backup Storage N750 Wireless Dual Band Gigabit Router WNDR4300 ? hi Time Machine Show All N me c Before You Back Up a Large Amount of Data Change the Partition Scheme Share a printer connected to the USB port ReadySHARE Printer Page Page Page USB Control Center Utility Control Center Configuration USB Printer Scan with a Multifunction Printer Keep unwanted content out of your network Keyword Blocking of HTTP Traffic Block Services (Port Filtering) Page Schedule Blocking Security Event Email Notifications Managing your network Upgrade the Firmware View Router Status Router Information Internet Port Show Statistics Button Connection Status Button Wireless Settings (2.4 GHz and 5 GHz) View Logs of Web Access or Attempted Web Access Manage the Configuration File Back Up Settings Restore Configuration Settings Erase Set Password Password Recovery Page Customize your network Advanced Wireless Settings Page Restrict Wireless Access by MAC Address Wireless AP Wireless Repeating Function (WDS) Page Set Up the Base Station Set Up a Repeater Unit Port Forwarding and Triggering Remote Computer Access Basics Port Triggering to Open Incoming Ports Page Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Add a Custom Service Edit or Delete a Port Forwarding Entry Application Example: Making a Local Web Server Public Set Up Port Triggering Page Dynamic DNS Static Routes Page Remote Management USB Settings Universal Plug and Play IPv6 Auto Detect Fields IPv6 LAN Setup IPv6 Filtering Auto Config 6to4 Tunnel Pass Through Fixed IPv6 Fixed WAN Setup IPb6 Fixed LAN Setup DHCP PPPoE Traffic Meter Page Quick Tips Sequence to Restart Your Network Power LED Check Ethernet Cable Connections Wireless Settings Troubleshoot with the LEDs Power LED Is Off or Blinking LEDs Never Turn Off Internet LED Is Off 2.4 GHz and 5 GHz LEDs Are Off Cannot Log In to the Router Cannot Access the Internet Changes Not Saved Incorrect Date or Time Wireless Connectivity Wireless Signal Strength Page Factory Settings Table 2. Factory default settings Technical Specifications Table 3. WNDR4300 Router specifications Table 2. Factory default settings (Continued) Table 3. WNDR4300 Router specifications (Continued) B B. Notification of Compliance NETGEAR Dual Band - Wireless Regulatory Compliance Information Europe - EU Declaration of Conformity EDOC in Languages of the European Community Page FCC Requirements for Operation in the United States FCC Information to User FCC Guidelines for Human Exposure FCC Declaration of Conformity FCC Radio Frequency Interference Warnings & Instructions FCC Caution Industry Canada IMPORTANT NOTE: Radiation Exposure Statement: Caution: NOTE IMPORTANTE: Dclaration d'exposition aux radiations: