NETGEAR WNR2000 user manual V1.2, January

Models: WNR2000

1 144
Download 144 pages 42.8 Kb
Page 24
Image 24

NETGEAR Wireless-N Router User Manual

Account Name (might also be called Host Name). The account name is provided to the ISP during a DHCP request from your router. In most cases, this setting is not required, but some ISPs require it for access to ISP services such as mail or news servers.

Domain Name. The domain name is provided by your router to computers on your LAN when the computers request DHCP settings from your router. In most cases, this settings is not required.

Internet IP Address. Determines how your router obtains an IP address for Internet access.

If your ISP assigns an IP address dynamically (by DHCP), select Get Dynamically From ISP.

If your ISP has assigned you a permanent, fixed (static) IP address for your computer, select Use Static IP Address. Enter the IP address that your ISP assigned. Also, enter the subnet mask and the gateway IP address. The gateway is the ISP’s router to which your router will connect.

Domain Name Server (DNS) Address. If you know that your ISP does not automatically transmit DNS addresses to the router during login, select Use These DNS Servers, and enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also.

Note: If you enter or change a DNS address, restart the computers on your network so that these settings take effect.

Router MAC Address. This section determines the Ethernet MAC address that the router will use on the Internet port. Typically, you would leave Use Default Address selected. However, some ISPs (especially cable modem providers) register the Ethernet MAC address of the network interface card in your computer when your account is first opened. They then accept only traffic from the MAC address of that computer. This feature allows your router to masquerade as that computer by “cloning” or “spoofing” its MAC address. To change the MAC address, select one of the following methods:

Select Use Computer MAC Address. The router will then capture and use the MAC address of the computer that you are now using. You must be using the one computer that is allowed by the ISP.

Select Use This MAC Address, and enter it here.

1-8

Configuring Basic Connectivity

v1.2, January 2009

Page 24
Image 24
NETGEAR WNR2000 user manual V1.2, January