Manuals / NETGEAR / Computer Equipment / Network Router

NETGEAR XWNB5602 manual

Models: XWNB5602

1 24

Page 8

After a few seconds, the security is set and the Power LED turns solid green. The Powerline adapters can communicate over the Powerline network in a secure way.

Warning: Do not press the Security button until the Power LED on each adapter is solid green. Pressing this button too soon can temporarily disable Powerline communication. If Powerline communication is disabled, use the Factory Reset button to return the Powerline adapter to its factory settings.

Page 8

Image 8

Contents

Powerline 500 WiFi Access Point XWNB5602 Installation Guide Contents Package Contents PowerlinePowerline WiFi Access PointHardware Features 7. Factory Reset button2. Power LED 5. Wireless LEDLED Descriptions Button Descriptions Set Up Your Powerline Network  To install the adapters and set up securityPage Room A 3. Plug the XAV5401 into a wall outlet near your router or gatewayRoom B Set Up WiFi Access on Your XWN5001  To set up WiFi access using NETGEAR genie5. On the Powerline Utility screen, right-click the XWN5001 icon 7. Enter the following wireless settings Wireless Network Name SSID Wireless Security Type Passphrase8. Click Apply Your changes are saved  To set up WiFi access using the browser setup guide Wireless network name SSID Network key Passphrase Connect to the XWN5001 Access Point  To manually connect to the XWN5001 access pointInstall NETGEAR genie  To download and install NETGEAR genie on your computerCompatible NETGEAR Powerline Devices Safety InformationPage Page Page Page Support TrademarksCompliance NETGEAR, Inc