Pioneer DV-220KV-K Playing files stored on USB devices, Recording audio CD tracks on USB devices

Playing files stored on USB devices

The player may not recognize the USB device, may not play files or may not supply power to the USB device. For details, see When a USB device is con- nected on page 19.

Pioneer does not support that all files recorded on all USB devices will play or that power will be sup- plied to the USB device. Also note that Pioneer will accept no responsibility whatsoever for loss of files on USB devices caused by connection to this player.

1 Turn the power on.

Press  STANDBY/ON.

2 Switching the input to the USB mode.

Press DVD/USB.

USb is displayed on the front panel display.

3 Connecting USB devices.

The Disc Navigator appears automatically.

Player’s front panel (DV-220KV-K)

To USB port

USB device

4 Starts playback.

Use /// to select the file, then press ENTER.

Turn the power off before removing the USB device.

The input will remain in the USB mode the next time the power is turned on. To return to the DVD mode, press DVD/USB (or press  OPEN/CLOSE to open the disc tray).

Recording audio CD tracks on USB devices

The tracks of audio CDs loaded in the player can be recorded on a USB device connected to the USB port.

It may not be possible to record tracks of audio CDs on a USB device. For details, see When a USB device is connected on page 19.

Selecting the track(s) to be recorded

1Load the audio CD.

If playback starts automatically, press  STOP to stop playback.

2Display the Home Menu.

Press HOME MENU.

3 Select CD -> USB Rec.

Use /// to select, then press ENTER.

CD –> USB Rec

		Track 1–13
Select Track	Individual	Track01	01:43
Bitrate	Select All	Track02	03:17
	All Clear	Track03	04:18
		Track04	04:59
		Track05	04:20
			04:38
Start		Track06
Selected Track	00	Track07	04:40
Total Time	000:00	Track08	04:11

4Select Select Track  Individual  the track(s) you want to record.

Use /// to select.

Individual: Select 1 track at a time.

Select All: Select all the tracks.

All Clear: Deselect all the tracks.

5 Select Bitrate (transfer rate).

Use /// to select, then press ENTER.

Select 128kbps, 192kbps or 320kbps.

6 Start recording.

Use /// to select Start, then press ENTER.

Notes

The audio signals are converted into MP3 format for output.

CD -> USB Rec can only be selected when the audio CD is stopped.

When recording is completed, a folder named “PIONEER” is automatically created on the USB device. The recorded tracks are stored in this folder.

12En