c. DSL Router and Analog Device on the Same Jack
1.
2.
3.
1.Connect the filter to your phone jack.
2.A filter is required between all phones, answering machines, fax machines, Caller ID units or analog routers and the phone jack for the DSL line.
3.Connect the phone line connecter to your router to the side of the filter labeled “ADSL HPN”.
d. DSL Router Running Directly from the Wall Jack with No Shared Devices
| 1. Connect the router to |
1. | your phone jack. |
| |
| 2. No filter is required if |
| the Netopia does not |
2. | share the line with an |
analog device. |
e. A NIC (Ethernet) card is required to complete this installation. If you do not have an available NIC card, contact your computer vendor or authorized technician to arrange for installation.
NOTE: The NIC card must be properly installed before beginning the installation of the DSL kit components.
Warnings and Cautions:
Refer to your PC manual for instructions on opening your PC to install new hardware. Follow all safety warnings and precautions as specified by your PC manufacturer.
In Addition:
•Back up any important files on your hard drive.
•Turn off your PC and unplug the power cord.
•Unplug all cables connecting your PC to the peripheral devices. Note the port location of each device so you can easily reconnect the cables later.
Installation Guide for Customer Self Install, Windows 9x/ME/NT/2000/Mac | Page 6 |
2002 MegaPath Networks Inc. All rights reserved. |
|
