7-10 User’s Reference Guide
System Configuration screens You can connect to the Netopia R310’s System Configuration screens:
■Using Telnet with the Router’s Ethernet port IP address
■Through the console port, using a local terminal (see “Connecting a local terminal console cable to your
router” on page 5-3)
You can also retrieve the Netopia R310’s configuration information and remotely set its parameters using the
Simple Network Management Protocol (see “SNMP” on page 11-10).
Open a Telnet connection to the IP address you set in the router with SmartStart, for example “192.168.1.1.”
ISDN Line Configuration
Circuit Type... ISDN, Switched
Switch Type... AT&T 5ESS Pt-to-Pt
Directory Number 1: 555-1234
PBX Prefix:
Data Link Encapsulation... PPP
Data Rate (kbps)... 38.4
Return/Enter to select <among/between> ...
Enter information supplied to you by your ISDN phone company.