Netopia R2121 manual Telnet client

Utilities and Diagnostics 15-5

	Trace Route
Host Name or IP Address:
Maximum Hops:	30
Timeout (seconds):	5
Use Reverse DNS:	Yes

START TRACE ROUTE

Enter the IP Address/Domain Name of a host.

Trace route to a network host.

To trace a route, follow these steps:

1.Select Host Name or IP Address and enter the name or address of the destination you want to trace.

2.Select Maximum hops (1..64) to set the maximum number of routers to count between the Netopia Router and the destination router, up to the maximum of 64. The default is 30 hops.

3.Select Timeout per probe (1..10 sec) to set when the trace will timeout for each hop, up to 10 seconds. The default is 3 seconds.

4.Select Use Reverse DNS to learn the names of the routers between the Netopia Router and the destination router. The default is Yes.

5.Select START TRACE ROUTE and press Return. The screen will be replaced by a scrolling screen, listing the destination, the number of hops, the IP addresses of each hop, and the DNS names, if selected.

6.Cancel the trace by pressing Escape. Return to the Trace Route screen by pressing Escape twice.

Telnet client

The Telnet client mode replaces the normal menu mode. Telnet sessions can be cascaded, that is, you can initiate a Telnet client session when using a Telnet console session. To activate the Telnet client, select Telnet from the Utilities & Diagnostics menu.