9-6 User’s Reference Guide
CNA works by checking the calling number that the Netopia Router receives during the initial setup phase of an incoming call against a set of stored numbers. Each number in the stored set is defined in a specific connection profile. When a match occurs, the incoming call is handled by the connection profile containing the matched number.
Using CNA can also provide cost savings because calls are not billed during the CNA phase. With CNA, a caller can set up a connection to the Netopia Router without incurring any charges by accessing a
CNA should be available where CallerID services are available. You will need to consult with your telephone service provider to find out if your line is provisioned for CallerID.
Also note that if the calling side has instructed the phone company to block delivery of its caller ID, the answering side will not be able to authenticate.
If your line does not support the appropriate service, CNA may not work properly.
3.To force incoming calls to match connection profiles, select Must Match a Defined Profile and toggle it to Yes. Incoming calls that cannot be matched to a connection profile are dropped. To allow unmatched calls to be accepted as standard IP or IPX connections, toggle Must Match a Defined Profile to No.
If Must Match a Defined Profile is set to Yes, the answer profile only accepts calls that use the same authentication method defined in the Authentication item. If PAP or CHAP are involved, the caller must have a name and password or secret that match one of the connection profiles. The caller must obtain these from you or your network administrator before initiating the call.
For example, if Must Match a Defined Profile is set to Yes, and Authentication is set to PAP, then only incoming calls that use PAP and match a connection profile will be accepted by the answer profile.
If authentication in the Default Answer Profile is set to CHAP, the value of the CHAP Challenge Name item must be identical to the value of the Send Host Name item of the Connection Profile to be matched by the caller.
If Must Match a Defined Profile is set to No, Authentication is assumed to be None, even if you’ve set it to PAP or CHAP. The answer profile uses the caller’s IP address to match a connection profile. However, the answer profile cannot discover a caller’s subnet mask; it assumes that the caller is not subnetting its IP address:
Class A addresses are assumed to have a mask of 255.0.0.0 Class B addresses are assumed to have a mask of 255.255.0.0
Class C addresses are assumed to have a mask of 255.255.255.0. Class C address ranges are generally the most common subnet allocated.
If a remote network has a
