Wireless USBNetwork Adapter
STEPC
3. Using the velcro strip on the Adapter’s Wall Mount, attach the Adapter to the
velcro strip on your wall.
If your PC is running Windows XP, proceed to “Chapter 6: Driver
Installation and Configuration for Windows XP.”
If your PC is running Windows 98SE,Me, or 2000, the installation of the
Wireless USBNetwork Adapter is complete. If you want to check the link
information,search for available wireless networks,or make additional
configuration changes, proceed to “Chapter 7: Using the WLAN Monitor
for Windows 98SE,Me, and 2000.”
13
Instant Wireless®Series
1. Attach the separate adhesive strip of vel-
cro to the wall that you will be mounting
the Adapter.
2. To attach the Wall Mount to the Adapter,
slide the Wall Mount into the grooves on
the back panel of the Adapter, as shown in
Steps A, B, and C.
STEPA
STEPB
12
Figure 5-6
Figure 5-7
Figure 5-8
Figure 5-9