Hardware Setup
1. Disconnect power from the CPU.
Note: The Host Adapter must be connected to the CPU before power is connected to the CPU. Failure to do so may result in damage to the Host Adapter.
2. Plug the Host Adapter into the devices and video ports on the back of the CPU.
(Front View)
video
Rear View of PS/2 CPU
devices
Rear View of USB CPU
Rear View of SUN CPU
video
(Front View)
video
(Front View)
devices
Cable to CPU
3. Connect a CAT5 cable from the "OUT" port on the Host Adapter to the "CAT5" port on the User Station (the PRIMUX KVM switch at the rear of the RACKMUX).
4. Connect the Terminating Plug (supplied) to the "IN" port on the Host Adapter.
FYI: If more Host Adapters will be connected, follow the instructions that follow for
2
(Rear View)
Terminating Plug (Supplied)
CAT5 Cable to User Station
