NTI CRYSTALMON TFT/LCD MONITOR
8
Power Supply Bracket
A power supply bracket has been supplied for the convenient mounting of the power supply for the CRYSTALMON.
This bracket can be directly mounted to the CRYSTALMON. Two possible mounting locations are shown in Fig. 2 on
Page 5.
Two #4-40 x 3/16” black screws have been supplied to secure the bracket to the back of the CRYSTALMON. Two
more #4-40 x 3/16” screws and cable clamps have been supplied to secure the cables to cable restraint posts on the
power supply bracket (see Fig. 3.)
Figure 3- Secure cables to power supply bracket
Cable Connections Connect the CRYSTALMON to a Video Source
The CRYSTALMON is provided with two different connectors for direct connection to video sources. A video
source of each type may be connected individually or both at the same time. The sources can be either VGA
or DVI. See Fig. 4 for illustration of each type of cable to be connected.
Figure 4- Connect VGA and/or DVI video sources
15HD Female
(VGA,XGA,SXGA)
DVI-DS-2M-MM
(supplied)
15HD male
Video Connector
15HD Male
VIEW OF CONNECTIONS ON CRYST ALMON
DVI-D Female
(Digital Video)
DVI-D Male
Video Connector
To Digital
Video Source
DVI-D Male
VEXT-6-MM
(supplied)
To VGA Video
Source
+
+
Cable to Monitor
Power Cord
Cable Clamp
(supplied)
3/16" x 4-40
Screw
(supplied)
Power Supply
Power Supply
Bracket
Side View