Network Technologies RACKMUX-UW15-4USB, RACKMUX-UW15-8USB, RACKMUX-UW17-4USB, RACKMUX-UW17-8USB

NTI RACKMUX Console Drawer with UNIMUX Switch

Command Mode (Cont'd)

Function:Keystroke:

Selects a specific port

Enters Search Mode and adds a character to search string and selects the CPU’s name that matches best.

Selects the first port on the switch

Selects the last port on the switch

Display Help Menu

Switch to a selected port

Update Configuration

	+	P -	x	-	x
Ctrl			(0-9)		(0-9)	(Pxx would be P01, P02, etc.)
A-Z	(Type any alphabetical or numeric character)
0-9

Home

End

F1

Enter

Ctrl	+	Tab	(Use this command to update the information
			describing the structure of the cascaded
			switches. Used if a slave is powered-ON or
			OFF at any time after initial startup.)

Display port information

Exit OSD Command Mode

(Display information about the selected port. When pressed,

F3 a window displays the port name and its position in the configuration structure by level and port number.)

Esc

Press <CTRL> while in the Command Mode menu to display the Edit, Maintenance, Port, and Settings control features.

Note: The user must exit Command Mode to type to a CPU.

To exit Command Mode, either hold down any touch-switch on the front panel for more than 2 seconds, OR press <ESC> on the keyboard.

Figure 11- More Command Mode Features

The mouse can also be used to control the UNIMUX switch within the Command Mode menu.

•The mouse cursor can be moved to the Scan, Help, Broadcast, Settings, Maintenance and Exit fields where the user can then click on the left mouse button to perform that function.

•Ports listed on the screen can be selected by moving the cursor onto that port and clicking. Clicking twice on a selected port will switch to that port and exit Command Mode.

•To change the displayed ports on the screen simply click on the up and down arrows located to the right of the port names displayed.

12