Network Technologies SE-DVI-2 operation manual Installation, DVI Female, Mating Face DVI Male

NTI VIDMUX Series 2-Port DVI Video Switch

INSTALLATION

The VIDMUX is a Plug-and-Play device with no special configuration settings and easy installation steps:

1.Before connecting the VIDMUX to the video sources, make sure the video sources and the monitor are turned OFF.

!WARNING! Damage may occur to the CPU if power is not disconnected before connecting or disconnecting cables.

2.Connect the monitor to the DVI female port labeled “MONITOR” on the rear panel of the VIDMUX using a male-to-male DVI-I cable.

Note: Some monitors need to have their video input type set manually. In this case, select “Digital DVI” as the input type.

Mating Face of				Rear View of SE-DVI-2
	DVI Female	Monitor		Video 2	Video 1
					NTI
		5VDC				R	NETWORK
			+				TECHNOLOGIES
							INCORPORATED
					1275 Danner Dr		Tel:330-562-7070
					Aurora, OH 44202 Tel:800-742-8324

www.networktechinc.com

DVI Enabled

Monitor

Mating Face of

DVI Male

3.Connect the video sources to their corresponding DVI ports labeled “VIDEO 1" and/or "VIDEO 2" on the rear panel of the VIDMUX using male-to-male DVI-I cables.

Rear View of SE-DVI-2

5VDC

Monitor	Video 2	Video 1
		NTI
			R	NETWORK
+				TECHNOLOGIES
				INCORPORATED
		1275 Danner Dr		Tel:330-562-7070
		Aurora, OH 44202		Tel:800-742-8324

www.networktechinc.com

DVI-IS-xx-MM

PC WITH DVI VIDEO PORT

	Mating Face of
DVI-IS-xx-MM	DVI Male

HDTV Tuner

2