TLM 193

Inhaltsverzeichnis

Table of Contents

2. Das Kondensatormikrophon TLM 193

2. The TLM 193 Condenser Microphone

1.

Kurzbeschreibung

1.

Brief Description

2.

Das Kondensatormikrophon TLM 193

2.

The TLM 193 Condenser Microphone

2.1

Ausführungsformen und Beschaltung des

2.1

Microphone Versions

 

Ausganges

 

and Output Wiring

2.2

Mikrophonkabel

2.2

Microphone Cables

3.

Stromversorgung

3.

Power Supply

3.1

Phantomspeisung

3.1

Phantom Powering

3.2

Betrieb mit Netzgeräten

3.2

Operation with AC Power Supply

3.3

Batteriespeisung

3.3

Battery Powering

3.4

Betrieb an unsymmetrischen oder

3.4

Operation with Unbalanced or Center

 

mittengeerdeten Eingängen

 

Tap Grounded Inputs

4.

Technische Daten

4.

Technical Specifications

5.

Frequenzgänge und Polardiagramme

5.

Frequency Responses and Polar Pattern

6.

Einige Hinweise zur Pflege von Mikrophonen

6.

Hints on Microphone Maintenance

7.

Zubehör

7.

Accessories

Das Kondensatormikrophon TLM 193 ist ein Stu- diomikrophon der Serie fet 100 mit der Richtcha- rakteristik Niere.

Die Buchstaben TLM stehen für „Transformatorlo- ses Mikrophon“.

Der zur Leistungsanpassung der Mikrophonaus- gangsspannung an die Betriebsspannung übli- cherweise verwendete Übertrager ist im TLM 193 durch eine elektronische Schaltung ersetzt, die – wie ein Übertrager – für eine gute Unsymmetrie- dämpfung sorgt. Daher werden Störsignale, die auf die symmetrische Modulationsleitung einwirken, wie gewohnt unterdrückt.

Die Eigenstörspannung des TLM 193 konnte ge- genüber vergleichbaren Mikrophontypen stark gesenkt werden, wobei das Mikrophon Schall- druckpegel von 140 dB unverzerrt überträgt und einen Dynamikumfang von 130 dB zur Verfügung stellt (nach DIN/IEC 651).

The TLM 193 Condenser Microphone is a studio microphone of the fet 100 series with a cardioid polar pattern.

The letters TLM stand for Transformerless Micro- phone.

The transformer which used to couple a micro- phone’s output to the supply voltage, has been replaced in the TLM 193 by an electronic circuit which, like a transformer, maintains the excellent common mode rejection (CMR). Interference induced in the balanced modulation line is therefore suppressed as usual.

The self-noise level of the TLM 193 is much lower than that of comparable microphone models while its overload capability extends to 140 dB SPL, providing a dynamic range of 130 dB (DIN/ IEC 651).

The TLM 193 has its axis of maximum sensitivity arranged radially; i.e. at right angles to the axis

1.Kurzbeschreibung

Das Kondensatormikrophon TLM 193 ist ein Stu- diomikrophon mit der Richtcharakteristik Niere.

Es zeichnet sich aus durch

besonders niedriges Eigengeräusch und höch- ste Aussteuerbarkeit,

transformatorlose Schaltungstechnik,

besonders saubere, freie und verfärbungsfreie Klangübertragung.

Das Mikrophon hat einen symmetrischen, übertra- gerlosen Ausgang. Der 3-polige XLR-Stecker hat folgende Belegung:

Pin 1: 0 V/Masse

Pin 2: Modulation (+Phase)

Pin 3: Modulation (–Phase)

Feldübertragungsfaktor 18 mV/Pa = – 35 dB re. 1 V/Pa. Das Mikrophon wird mit 48 V, 3 mA phan- tomgespeist (IEC 1938).

Die Einsprechrichtung ist seitlich, die Vorderseite wird durch das Neumann-Logo gekennzeichnet.

Das Mikrophon wird in einem Holzetui zusammen mit dem Stativgelenk SG 1 geliefert.

1.Brief Description

The TLM 193 is a studio condenser microphone with cardioid polar pattern.

Its most important features are

especially low self noise level combined with highest output capability,

transformerless circuit,

extraordinarily true sound transduction free of coloration.

The microphone has a balanced, transformerless output. The 3-pin XLR connector has the following pin assignments:

Pin 1: 0 V/ground

Pin 2: Modulation (+phase)

Pin 3: Modulation (–phase)

The output sensitivity is 18 mV/Pa = –35 dB re. 1 V/Pa. The microphone is phantom powered from 48 V, 3 mA (IEC 1938).

The axis of maximum sensitivity is at right angles to the main axis of the microphone. The front is designated by the Neumann logo.

The microphone comes in a wooden case including the SG 1 swivel mount.

Das Kondensatormikrophon TLM 193 wird von der Seite besprochen. Seine Vorderseite ist durch das Neumann-Emblem gekennzeichnet.

Die im Drahtgeflechtkorb des Mikrophons befind- liche Doppelmembrankapsel besitzt einen besonders ebenen Frequenzgang, und zwar nicht nur, wie vielfach üblich, für den von vorn einfal- lenden Schall, sondern auch für Schall, der seitlich innerhalb eines Winkelbereichs von mehr als ±100° einfällt. Daher verlaufen auch der Diffus- feld-Frequenzgang des TLM 193 bis 10 kHz parallel zu der in Abschnitt 5 gezeigten 0°-Grad-Kurve. Praktisch betrifft das die indirekt über Reflektio- nen im Aufnahmeraum zum Mikrophon gelangen- den Schallanteile. Damit wird auch ein etwa mit- aufzunehmender Nachhallschall durch das Mikrophon in seinem Klangcharakter nicht verän- dert. Dies unterscheidet das TLM 193 von einem Druckempfänger mit Kugelcharakteristik, bei dem Diffus- und Freifeldfrequenzgang nicht überein- stimmen können.

Da zum Erreichen der genannten Mikrophoneigen- schaften keine Resonanzwirkungen genutzt wer- den, ist das Impulsverhalten des Mikrophons aus- gezeichnet, und es vermag alle Ausgleichsvorgän- ge in Musik und Sprache unverfälscht zu übertragen.

Die gesamte Oberfläche der Kapsel einschließlich der Membranen liegt auf Massepotential und ist da- her unempfindlich gegen elektrische und atmo-

of its body.

The microphone front is marked by the Neumann insignia. Its grille houses a dual-membrane capsule with a particularly linear frequency re- sponse. This linearity applies not only for sound coming from the front but also for sound incidence angles up to ±100°, where the frequency response is flat up to 10 kHz. In view of these facts it follows that the diffuse-field response – namely the response in a lively acoustic environment with reflections entering the microphone from all directions – will also be linear. This is of vital importance in the recording environment and insures that the tone color of reverberant sound will not be altered by the microphone. This is in sharp contrast to an omni-directional pressure transducer in which the diffuse- and direct-field responses never match!

No resonance effects are used to obtain the characteristics mentioned above. As a consequence, the microphone features excellent transient behaviour and transmits all transient phenomena of music or voice without distortion.

The entire exposed surface of the capsule, including the membranes, is at ground potential making it immune to electric as well as atmospheric conditions and dirt. In order to protect the capsule from mechanical shock transmission it is elastically suspended.

2

3