New Balance sport ear buds with foldable behind the neck band warranty Model NB467

Model: NB467

Sport Ear Buds with

Modular Cord System

Using Your New Balance Sport Ear Buds with Foldable Behind The Neck Band

Your New Balance Ear Buds feature a foldable neckband for compact storage. Unfold the neckband completely, place it behind your neck with the short cord on your left side and insert the ear buds into your ears.

Your New Balance Sport Ear Buds were designed with a modular cord system. We have provided a 15” cable that is suitable if your music player will be worn in an arm-band or clipped to your clothing at chest level. We have also provided a 36” cable that is suitable if your music player will be clipped to your belt, placed in your pocket or carried in a fanny-pack

Connect the male headphone plug of the ear buds to the female headphone jack of either the 15” or 36” headphone cable depending on your wearing preference. Then connect the male headphone plug of the 15” or 36” cable to the headphone jack of your music player. Be sure that the plugs are fully inserted into the jacks. If the plug is not fully inserted you may only hear sound from one earpiece.

Using the Accessory Cord Winder Clip

Your New Balance Ear Buds are also supplied with a cord winder clip that may be used to eliminate excess slack in the 36” cable if necessary. If you find that that the 36” cable is too long you can store up to 24” of cable in the cord winder and then clip the cord winder to your clothing.

open the cord winder	pass the plug down	pull the cord back up
using the small tab	and through the cover	and over the spool
under the clip

wrap cord clockwise around the	close the cord winder	clip it on and go!
spool to reach desired length
	wind over
	20 inches!

Using the Water Resistant Connection Cover

Your New Balance Ear Buds are also supplied with a silicon sleeve that can be used to cover the connec- tion between the male headphone plug on the Ear Buds and the female headphone jack on the 15” or 36” cable. Use this connection cover if you routinely use your Ear Buds in extremely wet or damp conditions.

Stretch the connection cover over the plug of the Ear Buds as shown. After connecting the male plug of the Ear Buds to the female jack on the 15” or 36” cable. Slide the connection cover down so that it completely covers the plug and jack connection point to seal out excess moisture.