New Holland
Rolabar Rake Specifications
216 | 252 |
|
MODEL |
| 216 UNITIZED RAKE |
Overall height, ft. in. (mm) | 5'4" (1626) | |
Overall width (transport), ft. (mm) | 10 (3045) | |
Overall length (transport), ft. in. (mm) | 22'1" (6730) | |
Weight, approximate, lbs. (kg) | 3005 (1363) | |
Raking width |
| |
10'6" (3198) | ||
Up to 27 (8223) | ||
Tire sizes | 11L x 15 rib implement | |
Operating speed, mph (kph) | 2 to 10 (3 to 16) | |
Transport speed, mph (kph) | 20 (32) | |
Main frame | Tubular steel construction | |
Basket |
| |
Tines |
| Rubber mounted, 220 standard, 340 optional |
Tine bar bearings | Double ball | |
Tine ground clearance, in. (mm) | 8 to 11 (203 to 279) | |
Tractor requirement | 9 gpm hydraulic flow with 2000 psi relief, four remote outlets,double circuit | |
OPTIONS: |
| |
Front gauge wheel kit |
| |
Rear gauge wheel kit |
| |
| ||
Safety tow chain bundle |
| |
Safety chain hardware kit |
| |
RAKE HITCHES |
| |
MODEL |
| 252 |
Weight, lbs. (kg) | 735 (333) with wheels | |
Length, ft. in. (mm) | 17'5" (5305) | |
Maximum operating width |
| |
(with two 9 | 24 (7310) | |
Transport width, ft. in. (mm) | 8'11" (2716) | |
Hitch |
| Clevis type |
Frame |
| Rectangular steel tubing |
Rake Models | Two “256” rakes | |
|
| Two “258” rakes |
|
| One “258” and one “260” rake |
|
| Ground or hydraulic drive |
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
