Appendix
Display screen messages, lights and tones
Screen display messages
| CONNECTING... | The handset is waiting for a dial tone. | |
CONNECTING... |
|
| |
RINGING | There is a call coming in. | ||
| |||
|
|
| |
| PAGING | The handset is paging the base for an | |
|
| intercom call. | |
|
|
| |
| INTERCOM | The base is paging the hanset for an | |
|
| intercom call. | |
|
|
| |
| NEEDS RECHARGING | Handset battery is depleted. Place | |
|
| handset in base to charge the battery. | |
|
|
| |
| BATTERY LOW | Handset battery is low. Place handset in | |
|
| base to charge the battery. | |
|
|
| |
| NO LINE | The phone line is disconnected. Check | |
|
| the line jacks. | |
|
|
| |
| PHONE | The handset is in use. | |
|
|
| |
| EXTENSION IN USE | Another telephone on this line is in use. | |
|
|
| |
| OUT OF AREA | The handset is out of range. Move closer | |
|
| to the base. | |
|
|
| |
| MESSAGES WAITING | You have new voice mail. (Requires | |
|
| Voice Mail service local phone company.) | |
|
|
| |
| RINGER OFF | The handset ringer is turned off. | |
|
|
| |
| HOLD | Current call is on hold. | |
|
|
|
Appendix
Display screen messages, lights and tones
Alert tones
Handset battery is low. Place handset in | |
(Double beep every 5 seconds) | base to charge the battery. |
|
|
The handset is out of range. Move closer | |
(3 quick beeps) | to the base. |
|
|
Handset has not registered with base. | |
(1 double beep) | Place handset in base to |
|
|
“Beep” | Handset has registered with base and |
(Single beep) | can be used. |
|
|
“Beeeeeeeeep” | Confirm tone (current operation has been |
(1 long beep) | successfully completed). |
|
|
Error tone (current operation has been | |
(5 quick beeps) | unsuccessful; try again). |
|
|
Indicator lights
NEW CALL | IN USE/CHARGING | MUTE |
If you have Caller ID service: On when new | Steady: Handset battery is charging. | On when base |
calls have been received; off when all new Caller | Flashing: Phone is in use, or call is | microphone is muted. |
ID records have been reviewed (see page 20). | on hold. |
|
INTERCOM |
|
|
Flashing: Base is paging handset. |
|
|
Steady: Intercom is in use. |
|
|
MBOX
Steady: Mailbox contains messages.
Flashing: New messages have been received.
34 | 35 |
