AT&T 1475, 1175 user manual Speed dialing Mem+0-9, Entering names into directory

Directory Dialing

Speed dialing (Mem+0-9)

	Numbers called most frequently can be stored in memory
	locations 0-9 and dialed with only three button presses.
	The base can store 10 Speed Dial numbers up to 24
	digits long. Each number is stored in a one-digit memo-
Speakerphone Base	ry location, and can be dialed by pressing @SPEAKER,
	then @MEM followed by the memory location number
	(0-9 on the base dial pad).

To enter a Speed Dial number

1Press @PROG to begin programming.

2 Press @MEM.

3 Press dial pad to choose memory location (0-9). 4 Enter a telephone number (up to 24 digits).

5Press @PROG to store the number. You will hear a confirmation tone.

To call a Speed Dial number

Press @SPEAKER, then @MEM, followed by the memory location number (0-9 on the base dial pad). The number is dialed automatically.

To change a Speed Dial number

Follow steps 1-5 above to replace an existing num- ber with a new one in any memory location.

To delete a Speed Dial number

1Press @PROG.

2 Press @MEM.

3 Press dial pad to choose memory location (0-9).

4Press @PROG to delete the number stored in this memory location. You will hear a confirmation tone, and the memory location will be cleared.

1@PROG

DIRECTORY

2S

ENTER NAME

3

PAT JOHNSON_

4S

ENTER NUMBER

5

PAT JOHNSON 5556789_

6S

DISTINCT RING? N 5556789

7S

NEW 00 OLD 07

01/01 12:00AM

Directory Dialing

Entering names into directory

To enter a name

Press dial pad buttons once for the first letter, twice for the second, three times for the third, as shown in the example below. To enter a number, continue pressing the button until the number appears.

Press once to enter “A”

Press twice to enter “B”

2Press 3 times to enter “C” Press 4 times to enter “2”

The cursor moves to the right when you press another dial pad button or the >button. Press >twice to enter a space. When the name is complete, press S.

Options while entering names:

•Press <to erase letters if you make a mistake.

•Press #repeatedly to enter an ampersand (&), apostrophe ('), comma (,) hyphen (-), period (.), or pound sign (#).

To enter a number

Use the dial pad to enter up to 24 digits. When the number is complete, press S.

Options while entering numbers:

•Press <to erase numbers if you make a mistake.

•Press @REDIAL/PAUSE to enter a 4-second dialing pause.

To assign a distinctive ring

Press >to select Y (yes) or N (no). If you choose Yes (and if you have Caller ID service), a different handset ringing style will alert you when this person calls.

Press Sto choose the option displayed (Y or N) and store this entry in the directory.

16 17