AT&T 1475, 1175 user manual Parts checklist, Before you begin, About Caller Identification

Models: 1175

1 26
Download 26 pages 49.62 Kb
Page 4
Image 4
Parts checklist

Getting Started

Parts checklist

Getting Started

Before you begin

Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone package includes the following:

Telephone base

Telephone handset

About Caller Identification

Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call. These features require services provided by your local telephone company.

Contact your telephone service provider if:

You have both Caller ID and Call Waiting, but as separate services (you may need combined service)

You have only Caller ID service, or only Call Waiting service

You don’t subscribe to any Caller ID or Call Waiting services.

Telephone operating range

This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright.

If you receive a call while you are out of range, the handset might not ring — or if it does ring, the call might not connect when you press P.

Move closer to the base, then press Pto answer the call.

Power adapter

Belt clip

Battery pack

You can use this phone with regular Caller ID service, and you can use its other features without subscribing to either Caller ID or combined Caller ID with Call Waiting service. There may be fees for these services, and they may not be available in all areas.

If you move out of range during a phone conversation, you might hear noise or interference. To improve reception,move closer to the base.

If you move out of range without pressing O, your phone will be left “off the hook.” To hang up properly,

Long line cord

Short line cord

Caller ID features will work only if both you and the caller are in areas offering Caller ID service, and if both telephone companies use compatible equipment.

See Caller ID Operation, beginning on page 20, for more details about how these features work.

walk back toward the telephone base, periodically pressing Ountil the call is disconnected.

4

5

Page 4
Image 4
AT&T 1475, 1175 user manual Parts checklist, Before you begin, About Caller Identification, Telephone operating range