New Holland
Forage Blower Specifications
F62B
MODEL | F62B |
|
|
LENGTH | 108 in. (2,743 mm) | ||
WIDTH | 100 in. (2,540 mm) | ||
WEIGHT | 1,605 lbs. (729 kg) | ||
BLOWER |
|
|
|
Blowing height* | Over 100 ft. (Over 30 m) | ||
Blower housing | 60 in. dia. (1,524 mm) | ||
Paddles (adjustable) | 8 |
|
|
Paddle tip speed | 8,460 ft./min. (2,579 m/min.) | ||
Drive | Direct PTO |
| |
HOPPER |
|
|
|
Diameter | |||
Length | |||
Width | 37 in. (940 mm) | ||
Height from ground | in. (520 mm) | ||
|
| 1 | 2 |
| 1 | 8 |
|
| to 27 ⁄ | in. (699 mm) | |
Feeder type | Auger |
|
|
DRIVELINE PROTECTION | Shearbolt |
| |
PTO | 540 rpm |
| |
TIRES | |||
CAPACITY (with adequate power) |
|
|
|
Corn silage* | Up to 180 tons/hr. (163 mt/hr.) | ||
Haylage* | Up to 110 tons/hr. (100 mt/hr.) | ||
OPTIONAL EQUIPMENT | Pipe Clamp |
| |
| Kwik Pipe Bundle | ||
| Telescoping Pipe Section | ||
| Hinged Deflector | ||
| Safety Tow Chain+ | ||
|
|
|
|
*Capacity and height will depend upon tractor horsepower, type of crop, moisture content, length of cut, as well as general maintenance of pipes and spout. + Available from New Holland Service Parts.
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating 
decals and never operate machinery
without all shields, protective devices and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
