INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

3

Page 2 Page 4
Page 3
Image 3
Whirlpool ED2FHEXNL01 Installation Instructions, Unpack the Refrigerator, Location Requirements, Electrical Requirements
Page 2 Page 4

ED2GHEXNL01, ED2GHEXNQ00, ED2GHEXNT00, ED2GHEXNB00, ED2GHEXNQ01 specifications

The Whirlpool ED2FHEXNQ01, ED2FHEXNQ00, ED2FHEXMT00, ED2FHEXNL01, and ED2FHEXMQ00 are part of a robust line of refrigerators from Whirlpool, a trusted name in home appliances. These models embody innovative features and advanced technologies designed to enhance kitchen functionality and food preservation.

One of the standout features of these models is the Adaptive Defrost technology. This intelligent system monitors how often the freezer door is opened and the frequency at which the compressor runs. By doing so, it helps to optimize energy efficiency by defrosting the freezer only when necessary, which also aids in keeping your food fresh for longer periods.

Another notable characteristic is the Accu-Chill Temperature Management System. This system utilizes sensors to detect and adjust temperatures as needed in both the refrigerator and freezer compartments. It ensures that your food stays at the optimal temperature, enhancing freshness while reducing energy consumption.

The Whirlpool ED2FHEXNQ01 and its counterparts also feature a side-by-side design, maximizing storage space while providing easy access to your food items. The adjustable shelving allows users to customize the interior layout to suit their needs, accommodating larger items with ease. The humidity-controlled crisper drawers keep fruits and vegetables fresh longer, preserving their natural flavors and textures.

In terms of design, these models boast a sleek and modern appearance that can seamlessly blend into any kitchen aesthetic. The exterior is often fingerprint-resistant, making it easier to maintain a clean look without constant cleaning.

Energy efficiency is a key concern for modern appliances, and the Whirlpool ED2FHEXN line meets these demands with ENERGY STAR certification. This not only supports environmental sustainability but also reduces household energy costs.

Finally, user-friendly features like the internal water dispenser provide quick access to chilled water, and the easy-to-use control panel allows for precise temperature adjustments.

In summary, the Whirlpool ED2FHEXNQ01, ED2FHEXNQ00, ED2FHEXMT00, ED2FHEXNL01, and ED2FHEXMQ00 refrigerators combine advanced technology with practical features to create an efficient, reliable, and aesthetically pleasing appliance. Whether you're looking to upgrade your kitchen or seeking a reliable appliance, these models represent an excellent choice for discerning consumers.
Top Page Image Contents