■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Dump the ice cubes and clean the ice bin.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice or water.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Is the water pressure at least 30 psi? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

■Kink in the home water source line? Straighten the water source line.

■New installation? Flush and fill the water system.

■Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

■Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements” in either the Installation Instructions or the Use & Care Guide.

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice or water.

Failure to do so can result in cuts.

■Glass not being held under the dispenser long enough? Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■New installation? Flush the water system. See “Ice and Water Dispensers.”

■Recently changed water filter? Flush the water system. See “Ice & Water Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■New installation? Allow 24 hours after installation for the water supply to cool completely.

■Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

WATER FILTER CERTIFICATIONS

10

Page 9 Page 11
Page 10
Image 10
Whirlpool ED2FHEXNS01, ED2FHEXNQ01, ED2FHEXNQ00, ED2FHEXMT00, ED2FHEXNL01 New installation? Flush and fill the water system
Page 9 Page 11

ED2GHEXNL01, ED2GHEXNQ00, ED2GHEXNT00, ED2GHEXNB00, ED2GHEXNQ01 specifications

The Whirlpool ED2FHEXNQ01, ED2FHEXNQ00, ED2FHEXMT00, ED2FHEXNL01, and ED2FHEXMQ00 are part of a robust line of refrigerators from Whirlpool, a trusted name in home appliances. These models embody innovative features and advanced technologies designed to enhance kitchen functionality and food preservation.

One of the standout features of these models is the Adaptive Defrost technology. This intelligent system monitors how often the freezer door is opened and the frequency at which the compressor runs. By doing so, it helps to optimize energy efficiency by defrosting the freezer only when necessary, which also aids in keeping your food fresh for longer periods.

Another notable characteristic is the Accu-Chill Temperature Management System. This system utilizes sensors to detect and adjust temperatures as needed in both the refrigerator and freezer compartments. It ensures that your food stays at the optimal temperature, enhancing freshness while reducing energy consumption.

The Whirlpool ED2FHEXNQ01 and its counterparts also feature a side-by-side design, maximizing storage space while providing easy access to your food items. The adjustable shelving allows users to customize the interior layout to suit their needs, accommodating larger items with ease. The humidity-controlled crisper drawers keep fruits and vegetables fresh longer, preserving their natural flavors and textures.

In terms of design, these models boast a sleek and modern appearance that can seamlessly blend into any kitchen aesthetic. The exterior is often fingerprint-resistant, making it easier to maintain a clean look without constant cleaning.

Energy efficiency is a key concern for modern appliances, and the Whirlpool ED2FHEXN line meets these demands with ENERGY STAR certification. This not only supports environmental sustainability but also reduces household energy costs.

Finally, user-friendly features like the internal water dispenser provide quick access to chilled water, and the easy-to-use control panel allows for precise temperature adjustments.

In summary, the Whirlpool ED2FHEXNQ01, ED2FHEXNQ00, ED2FHEXMT00, ED2FHEXNL01, and ED2FHEXMQ00 refrigerators combine advanced technology with practical features to create an efficient, reliable, and aesthetically pleasing appliance. Whether you're looking to upgrade your kitchen or seeking a reliable appliance, these models represent an excellent choice for discerning consumers.
Top Page Image Contents