Ceiling Installation – Solid Surface
Upper Bridge
M6 x 8mm Set Screw
Base Box
1.Separate the Upper Bridge from the Base Box by removing the six (6) M6 x 12mm Phillips head screws (three on each side).
Wood Ceiling Stud
Ceiling Surface
Mounting Slot
Upper Bridge
#14 x 2”Wood Screws
2.Use the appropriate slot openings for single wood stud mounting, depending on your ceiling configuration. The adjustable channel slots on the upper bridge plate will allow you to fine tune the final orientation of the projector.
3.Secure the Upper Bridge to the center of the stud on the ceiling structure at this time using two (2) #14 x 2” wood screws (supplied).
Page - 8 - | Installation Instructions |