PDS-PLUS
Ceiling Installation – Pipe
Unpack the PDS-PLUS Mount and familiarize yourself with the components. Please take time before you install the PDS-PLUS to determine the location of where the PDS-PLUS will be mounted.
The PDS-PLUS may be attached to 1-1/2” standard threaded pipe (NPT), to one of Premier Mount’s optional ceiling adapters (see page 6), or to a single wood stud (see Page 8). If using an optional adapter, please refer to the installation instructions that come with adapters.
1.After the pipe has been properly secured to the ceiling structure, thread the base box to the lower portion of the pipe.
PDS Base Box
M3 Allen Wrench
2.Secure the base box to the pipe with the M6 x 8mm set screw and tighten it down using the M3 Allen wrench (supplied).
Installation Instructions | Page - 7 - |
