New Holland HM200 Series Economy
Disc Mower Specifications
HM234 | HM235 | HM236 |
|
|
|
MODEL |
|
| HM234 | HM235 | HM236 |
CUTTER BAR |
|
|
|
| |
Cutting width, ft. in. (mm) | 5' 6" (1.7) | 6' 9" (2.1) | 7' 11" (2.4) | ||
Cutting height, in. (mm) | ............................................................................................................. | ||||
Cutter bar tilt angle, degrees | 0 to | 1 to | 2 to | ||
Cutter bar operating range, degrees | +18 to | ||||
Breakaway angle, degrees | 21 | ||||
Type cutterbar |
| Enclosed gear drive | |||
Number of discs |
| 4 | 5 | 6 | |
Knives per disc |
| 2 | |||
Disc cutting diameter, in. (mm) | 20.47 (520) | ||||
Disc drive |
|
| Spur gear drive in common sump | ||
Disc speed, RPM |
| 3154 | |||
DRIVELINE |
|
|
|
|
|
Minimum PTO horsepower required, hp (kW)1 | 35 PTO (26.1) | 40 PTO (29.8) | 50 PTO (37.3) | ||
Input speed, RPM | .................................................................... | 540 | |||
Driveline protection |
| Belt drive to cutter bar | |||
Overrunning clutch |
| On PTO shaft | |||
Belt tension |
|
| Adjustable | ||
HYDRAULICS AND HITCH |
|
|
| ||
Hydraulic circuits required | One remote | ||||
Minimum relief pressure required, psi (bar) | 2,320 (160) | ||||
Hitch |
|
| Category I or II | Category I or II | Category II |
DIMENSIONS AND WEIGHT |
|
|
| ||
Overall width, in. (mm) |
| 134.25 (3410) | 149.21 (3790) | 178.35 (4530) | |
Overall length, in. (mm) | ........................................ | 54.33 (1380) | |||
Height - transport position, in. (mm)2 | 92.52 (2350) | 107.48 (2730) | 122.44 (3110) | ||
Weight, lb. (kg) |
| 822 (373) | 905 (411) | 1077 (489) |
1Recommended for use with tractors having a fully enclosed cab.
2Transport height is based on
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2009 CNH America LLC
New Holland is a registered trademark of CNH America LLC.