New Holland MC35 specifications New Holland, Commercial Front Mower Specifications, G6035, MC22

New Holland

Commercial Front Mower Specifications

MC22	MC28	MC35	G6030	G6035
MODEL				MC22	MC28	MC35	G6030	G6035
GROSS HORSEPOWER				22	28	35	30	36
ENGINE
Engine type				....................................................................................		Diesel
Number of cylinders						3
Displacement, cu. in. (L)				61.3 (1.0)	81.1 (1.3)	101.4 (1.7)	91.3 (1.5)	101.4 (1.7)
Air cleaner	................................................................................................				.....................................	Dry, dual element
Fuel tank capacity, gal. (L)					.........................................	13.3 (50.0)
Approved biodiesel blend					...............................................	B5
ELECTRICAL
Voltage						12
Alternator, amps					................................................	40
Battery, cca						490
TRANSMISSION
Type						Hydrostatic
Ranges				................................................................		2
4WD				................................................		Auto or full 4WD
Direction control						Two separate foot pedals
Cruise control					.............................................	Optional
Speed ranges (with large tire), mph (kph)
Forward, min-max				0-10.7 (0-17.2)	0-10.7 (0-17.2)	0-10.7 (0-17.2)	0-15.2 (0-24.5)*	0-15.2 (0-24.5)*
Reverse, min-max				0-7.0 (0-11.3)	0-7.0 (0-11.3)	0-7.0 (0-11.3)	0-9.8 (0-15.8)*	0-9.8 (0-15.8)*
FRONT AXLE
Type					.............................................	Flanged
Differential lock					........................................	Standard
Brake						Wet disc
Parking brake					.................................	Hand-engaged lever
2WD rear axle				Optional	Optional	NA	NA	NA
Tread width (with standard tire), in. (cm)				39 (99.0)	39 (99.0)	NA	NA	NA
Turning radius, in. (cm)				28.7 (72.9)	28.7 (72.9)	NA	NA	NA
Turning angle				57°	57°	NA	NA	NA
Oscillation				9°	9°	NA	NA	NA
4WD rear axle				Optional	Optional	Standard	Standard	Standard
Drive type						Automatic or full-time
Tread width (with standard tire), in. (cm)						39.2 (99.6)
Turning radius, in. (cm)					.........................................	29.5 (74.9)
Turning angle						56°
Oscillation						8°
STEERING
Type						Hydrostatic power
PTO
Type						Independent
Speed (at engine rated speed), rpm						2209
Engagement						Mechanical
HYDRAULIC SYSTEM
Type					.........................................	Open center
Pump capacity, gpm (lpm)				1.9 (7.2)	2.4 (9.1)	2.4 (9.1)	2.4 (9.1)	2.4 (9.1)
Remote valve					.............................................	Optional

*measured with 24x13-12 and 20x8-10 tires.

Page 1 of 2