1011 PTO AND HYDRAULICS
SPECIALIST TRACTORS FOR SPECIALIST NEEDS
The modular build of T4000F/N/V tractors enables New Holland to offer a broad range of specifications that exactly matches your specialised need. The standard hydraulic flow of all models is 48.6 Lpm. Need more flow? Specify the Megaflow pump, and output can be increased to 63.8 Lpm.*
T4000F/N/V. Factory built to your specification.
* Standard for the Australian market.
DIRECT OUTPUT, NO LOSS OF POWER
Engaged via a servo assisted control, the rear pto on T4000F/N/V tractors has a direct driveline to minimise power loss. Maximum engine power is directed to the PTO for optimum efficiency and performance. A choice of Ground Speed/540/540E/1000 PTO speeds are available.
HYDRAULIC LINKAGE SETTINGS
Hydraulic stabilisers can be specified to allow the attachment to be offset to either side of the tractor. The stabilisers can be set in a fixed or float position by the push of a button. A levelling ram can also be specified for the right lower link arm. Both systems have a dedicated hydraulic supply.
DIRECT PTO POWER OUTPUT