New Holland
TT45A TT50A TT60A TT75A
MODEL | TT45A | TT50A | TT60A | TT75A |
FRONT AXLE |
|
|
|
|
2WD |
|
|
|
|
Track adjustment, in. (mm) | 50.3 (1277) to 70.6 (1793) | 52.2 (1326) to 68.7 (1744) | ..............................56.4 (1432) to 74 (1879) | |
Maximum turn angle | 55 degrees | |||
Maximum axle oscillation | ........................................11 degrees | |||
Steering cylinder & linkage | ......................Contained behind main axle beam | |||
FWD |
|
|
|
|
Track adjustment, in. (mm) | NA | 57.6 (1462) to 78.1 (1984) | 59.6 (1515) to 79.6 (2022) | |
Maximum wheel turn angle | NA | .........................................55 degrees | ||
Maximum axle oscillation | NA | .........................................11 degrees | ||
Steering cylinder & linkage | NA | ...........................Contained in main axle beam | ||
Front differential lock | NA | .........................................Limited slip | ||
FWD clutch engagement | NA | .....................................Mechanical lever | ||
ELECTRICAL |
|
|
|
|
Alternator | 12 Volt, 40 Amp | .....................................12 Volt, 45 Amp | ||
Battery capacity (cold cranking amps) | 600 | ...............................................800 | ||
Lighting | 2 hi/lo beam halogen headlights, flashing safety lights / turn signals | |||
Accessory power outlets | ...............Standard equipment, | |||
Fuses | .................................Automotive blade type | |||
APPROXIMATE SHIPPING WEIGHT |
|
|
|
|
ROPS - 2WD, lbs. (kg) | 3,600 (1633) | 3,738 (1695) | 4,540 (2049) | 4,740 (2150) |
ROPS - FWD, lbs. (kg) | NA | 4,989 (2263) | 5,189 (2354) |
†Manufacturer's estimate *TT75A w/16.9x30 tires NA - Not Applicable
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2009 CNH America LLC
New Holland is a registered trademark of CNH America LLC.