New Holland
TV6070 Bidirectional™ Tractor Specifications
TV6070
MODEL | TV6070 |
HYDRAULIC SYSTEMS |
|
Standard |
|
Type | CCLS with piston pump |
Total flow @ 2200 engine RPM, GPM (LPM) | 29.5 (111) |
Pressure compensator, PSI (Bar) | 3,000 (207) |
Remote | 3 |
3 | |
Valve actuation | Hand levers, foot pedals |
Remote | 2 |
Valve actuation | Hand levers |
Couplers | 1/2" ISO, 2 for each valve |
Optional auxiliary hydraulics |
|
Type | CCLS with piston pump; electronic flow control |
Maximum flow @ 2200 engine RPM, GPM (LPM) | 35 (133) |
Pressure compensator, PSI (Bar) | 4350 (300) |
Couplers | 3/4" ISO, with 1/2" case drain |
|
|
Type | Category II, flex link ends and sway links |
Controls | Electronic position control, auto and manual modes |
Standard cab end |
|
Lift capacity @ 24" behind links, lbs. (kg) | 6,500 (2950) |
Optional cab end |
|
Lift capacity @ 24" behind links, lbs. (kg) | 8,700 (3950) |
Optional engine end |
|
Lift capacity @ 24" behind links, lbs. (kg) | 4,000 (1800) |
STEERING |
|
Type | Hydrostatic power |
Articulation angle | 45 degrees maximum |
Curb clearance circle, ft. in. (m) | 32' 10" (10.0) |
CAB |
|
Type | |
Tinted safety glass, area, ft2 (m2) | 61 (5.67) |
Climate control | Pressurizer, heater/defroster, air conditioning |
Fan | |
Seat | Air suspension, 7 comfort adjustments |
Turnabout™ console | 210 degree rotation to face either driving direction |
DRAWBARS |
|
Type | |
Cab end | Standard |
Engine end | Optional |
REFILL CAPACITIES |
|
Fuel tanks, gal. (L) | 55 (208) |
Engine oil, gal. (L) | 5 (19) |
Engine coolant, gal. (L) | 7.25 (27) |
Hydraulic system/rear axle, gal. (L) | 13.5 (51) |
Front axle, gal. (L) | 6.5 (25) |
Visit our Web site at www.newholland.com/na. Or, call
Design, materials and/or specifications are subject to change without notic e and withou t liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.
Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual
before using the equipment. Pay close attention to all safety and operating decals and never operate machinery
without all shields, protective devices and structures in place.
© 2009 CNH America LLC
New Holland is a registered trademark of CNH America LLC.