NewAir AC-14100H Ionizer Function Optional, Self-DiagnosisFunction, Please Note, operate

Heating Function (Optional – Only Available on AC-14100H Model)

This portable air conditioner can work as a heater because it has a heat pump. Ambient warm air

is recycled and used to heat specific areas. In order to use the air conditioner as a heater, the exhaust hose must still be fitted onto the unit in order to allow cold air to be removed.

When in heating mode, the unit can run on either high or low speed.

Ionizer Function (Optional)

Press the IONIZER button to turn on the portable air conditioner’s built-in ionizer. This helps remove dust and other large particles from your air.

Self-Diagnosis Function

This machine is equipped with a self-diagnosis function. If there is a problem with the air conditioner, the LCD screen will display an “E1” or “E2” error message. If this occurs, please contact a service center.

All of the above functions can also be performed with	FIG.18
the supplied remote control.
This remote control requires 2 AAA batteries to
operate.

Energy Efficiency Boosting Function

This unit is equipped with an energy efficiency boosting function. By adding water to the tank as shown below, energy efficiency can be increased, therefore saving you money on your energy bill and conserving the environment.

FIG.19

PLEASE NOTE:

To use the energy efficiency boosting function, please follow the steps above at least one hour after operation.

9