NewAir AC 12000E manual Heating Mode, Ionizer, Error Messages, The remote requires 2 AAA batteries

k0045

Heating Mode:

When the air conditioner is in heating mode, ambient warm air is recycled and used to heat

your immediate area. The exhaust pipe will still need to be fitted onto the unit in order

for the cold air to be removed. When in heating mode, the machine can be set on HIGH or LOW speed.

Ionizer:

Press IONIZER button to activate the ionizer function.

Error Messages:

If there is an error with the air conditioner, the LCD screen will display “E1” or “E2.” If either of these error messages appears, please contact the manufacturer or a service center.

All of the above functions can be controlled with the included remote.

The remote requires 2 AAA batteries.

FIG.13

Please Note:

1.To prolong the life of the compressor, after turning off the unit, please wait at least 3 minutes before turning it back on.

2.The cooling system will turn off if the ambient temperature is lower than the set temperature. However, the fan will continue operating at the set level. Once the ambient temperature rises above the set temperature, cooling will resume.

3.The heating system will turn off if the ambient temperature is higher than the set temperature. The ventilation fan will continue operating at the set level. Once the ambient temperature drops below the set temperature, heating will resume.

4.This machine is equipped with an anti-frost function. When using the heating function in low temperatures, the heater will occasionally stop heating in order to melt any frost that has accumulated within the air conditioner. Normal operation will resume in a few moments.

8