k0045
For Continuous Drainage:
•Remove the rubber plug from the drainage port and retain it for future use.
•Connect the drain tube to the drainage port as shown (fig. 17).
•Connect the other end of the hose to a drain.
Rubber plug | Drain knob |
| FIG.15 |
•The drain tube may be extended by adding an extension tube with a suitable connector.
Please Note:
1.The drain must be at or below the level of the drainage port.
2.The full water tank indicator light will not work when the unit is being continuously drained.
3.To extend the drain tube, you can connect it with another hose with an overall diameter of approximately 0.7” .
Drain tube
FIG.16
Original drain tube
Extended drain tube(OD: 0.7” ) 
FIG.17
10
