INSTALLATION INSTRUCTIONS
Before Using Your Wine Refrigerator:
zRemove exterior and interior packing material.
zCheck to make sure the following parts are included:
3
Door handle and 2 screws
Instruction manual
zBefore connecting the appliance to the power supply, let it stand upright for approximately 2 hours. This will reduce the possibility of malfunction in the cooling system that may have occurred from handling during transportation.
zClean the wine cooler’s interior surface with lukewarm water using a soft cloth before using the wine cooler for the first time.
Installing Your Wine Refrigerator:
zPlace the appliance on a floor that is strong enough to support it when it is fully loaded. To level the wine refrigerator, adjust the front feet located on the bottom of the appliance.
zKeep the wine cooler away from direct sunlight and excess heat sources such as stoves, heaters, radiators, etc. Direct sunlight may affect the unit’s acrylic coating and heat sources may increase electricity consumption. Extreme cold or hot ambient temperatures may also cause the appliance to perform improperly.
zThis unit can be recessed. Please allow a 1” inch clearance all around the unit.
IMPORTANT SAFEGUARDS
Do not store food items in the wine refrigerator. The unit’s interior temperature may not be low enough to prevent spoilage.
OPERATING YOUR WINE REFRIGERATOR
It is recommended that you keep the wine refrigerator in a place where the ambient temperature is between
The temperature display reflects the temperature of the area near the center racks in the wine refrigerator. Keep in mind that the temperature may fluctuate approximate
The temperature may fluctuate depending on whether or not the interior light is on or off and whether the bottles are located on the upper, middle, or lower racks.
Setting the Temperature:
Use the push buttons to set your desired temperature. Use the “▲” and “▼” to adjust the temperature by 1° F between
