Mac OS X V10.3 and later
1.Make sure the product is turned on.
2.Insert the CD into the
3.
4.Follow the instructions on the computer screen.
5.Connect a USB cable between the product USB port and the computer USB port. Use a standard
NOTE: USB printer queues are created automatically when the product is attached to the computer. However, the queue will use a generic PPD if the installer has not been run before the USB cable is connected.
6.From the Apple menu, click System Preferences and then Print & Fax.
7.If the product name appears in the Printer list, setup is complete. If the product name does not appear in the printer list, continue with the next step.
8.Click Add or +, and then select Default Browser or Default. Select the product name from the Printer Browser.
9.Click Add. The Installable Options dialog box appears. Select the product options that you are using.
10.Print a test page from any software program to make sure that the software is correctly installed.
If installation fails, reinstall the software. If this fails, see the installation notes or
Install Macintosh software for networks
Mac OS X V10.2.8
1.Connect the network cable between the HP Jetdirect print server and a network port.
2.Insert the CD into the
3.
4.Follow the instructions on the computer screen.
5.On the computer hard drive, open Applications, open Utilities, and then open Print Center.
6.Click Add.
7.From the
Rendezvous
a.Select the product from the list.
b.Select the printer model if one is not already selected.
ENWW | Software for Macintosh 61 |