3.Make sure that the environmental specifications for the device are being met. See Operating environment on page 252.
4.Replace the print cartridge.
Scattered lines
Figure
1.Make sure that the type and quality of the media you are using meet HP specifications. See Supported paper and print media sizes on page 81.
2.Make sure that the environmental specifications for the device are being met. See Operating environment on page 252.
3.Turn over the stack in the tray. Also, try rotating the stack 180°.
4.Open the Administration menu at the device control panel. Open the Print Quality submenu and change the Toner Density setting. See Print Quality menu on page 42.
Blurred print
Figure
1.Make sure that the type and quality of the media you are using meet HP specifications. See Supported paper and print media sizes on page 81.
2.Make sure that the environmental specifications for the device are being met. See Operating environment on page 252.
3.Turn over the stack in the tray. Also, try rotating the stack 180°.
4.Do not use media that already has been run through the device.
5.Decrease the toner density. Open the Administration menu at the device control panel. Open the Print Quality submenu and change the Toner Density setting. See Print Quality menu
226 Chapter 12 Problem solve | ENWW |