3.On the empty staple cartridge, pull up on the green tab, and then pull the empty cartridge out. Figure 7-3Load staples in the stapler/stacker (3 of 5)

4.Insert the new staple cartridge, and push down on the green tab so that the cartridge locks into place.

Figure 7-4Load staples in the stapler/stacker (4 of 5)

5.Close the stapler unit door and push the stapler/stacker back into place. Figure 7-5Load staples in the stapler/stacker (5 of 5)

Load staples in the multifunction finisher

1.Open the stapler unit door.

Figure 7-6Load staples in the multifunction finisher (1 of 8)

106 Chapter 7

Print tasks

ENWW