HP M9050 MFP Http Test, Snmp Test, Select All Tests, Data Path Test, Execution Time H, Execute

Table 2-10Jetdirect menus (continued)

Menu item	Sub-menu item	Sub-menu item	Values and Description
			Select Yes to choose this test, or No to not choose it.
		HTTP Test	This test checks operation of HTTP by retrieving
			predefined pages from the device, and tests the
			embedded Web server.
			Select Yes to choose this test, or No to not choose it.
		SNMP Test	This test checks operation of SNMP communications
			by accessing predefined SNMP objects on the device.
			Select Yes to choose this test, or No to not choose it.
		Select All Tests	Use this item to select all available embedded tests.
			Select Yes to choose all tests. Select No to select
			individual tests.
		Data Path Test	This test helps to identify data path and corruption
			problems on an HP postscript level 3 emulation device.
			It sends a predefined PS file to the device, However,
			the test is paperless; the file will not print.
			Select Yes to choose this test, or No to not choose it.
		Execution Time [H]	Use this item to specify the length of time (in hours) that
			an embedded test will be run. You can select a value
			from 1 to 60 hours. If you select zero (0), the test runs
			indefinitely until an error occurs or device is turned off.
			Data gathered from the HTTP, SNMP, and Data Path
			tests is printed after the tests have completed.
		Execute	No*: Do not initiate the selected tests.
			Yes: Initiate the selected tests.

30 Chapter 2 Control panel ENWW