Test the SMTP settings

1.From the Home screen, touch Administration.

2.Touch Initial Setup.

3.Touch E-mail Setup, and then touch Test Send Gateway.

If the configuration is correct, Gateways OK appears on the control-panel display.

If the first test was successful, send an e-mail to yourself by using the digital-send feature. If you receive the e-mail, you have successfully configured the digital-sending feature.

If you do not receive the e-mail, use these actions to resolve issues with the digital-sending software:

●Check the SMTP and address to make sure that you typed them correctly.

●Print a configuration page. Verify that the SMTP gateway address is correct.

●Make sure that the network is operating correctly. Send an e-mail to yourself from a computer. If you receive the e-mail, the network is operating correctly. If you do not receive the e-mail, contact your network administrator or Internet service provider (ISP).

●Run the DISCOVER.EXE file. This program attempts to find the gateway. You can download the file from the HP Web site at www.hp.com/support/ljm9040mfp or www.hp.com/support/ ljm9050mfp.

ENWW

Configure the device to send e-mail 135