2.Move the output device away from the MFP.

Figure 12-21Clear jams in the stacker or stapler/stacker (2 of 7)

3.On the stacker, lift the wire on the lower bin of the device, and carefully pull out any media from this area. On the stapler/stacker, carefully pull out any media that might be protruding from the accumulator area.

NOTE: Only the stacker has the wire on the lower bin.

Figure 12-22Clear jams in the stacker or stapler/stacker (3 of 7)

4.Locate the green handle in the flipper area and lift the handle. Figure 12-23Clear jams in the stacker or stapler/stacker (4 of 7)

5.Carefully pull out any media from the flipper area.

Figure 12-24Clear jams in the stacker or stapler/stacker (5 of 7)

WARNING! Avoid touching the flipper area. It can be hot.

200 Chapter 12 Problem solve

ENWW

Page 214
Image 214
HP M9050 MFP manual Move the output device away from the MFP