HP M9050 MFP manual Administration Default Job Options Default Copy Options

Default Copy Options

Administration > Default Job Options > Default Copy Options

NOTE: Values shown with “(default)” are the factory-default values. Some menu items have no default.

Table 2-3Default Copy Options menu

Menu item Sub-menu item Values Description

Number of Copies	Type the number of
	copies. The factory
	default setting is 1.

Set the default number of copies for a copy job.

Number of Sides		1 (default)	Set the default number of sides for copies.
		2
Staple/Collate	Staple	None (default)	Set up options for stapling and collating sets of copies.
		Staple options	When you make multiple copies of a document,
			collating places the pages in the correct order, one set
			at a time, rather than placing all copies of each page
	Collate	Off
			next to each other.
		On (default)
Output Bin		Bin numbers/name	Select the default output bin, if applicable, for copies.
Edge-To-Edge		Normal (recommended)	If the original document is printed close to the edges,
		(default)	use the Edge-To-Edgefeature to avoid shadows that
		Edge-To-Edge Output	can appear along the edges. Combine this feature with
			the Reduce/Enlarge feature to ensure that the entire
			page is printed on the copies.
Auto Include Margins		Off (default)	Select this feature to ensure that the entire image
		On	appears on the copy, including any content that is close
			to the edges. If necessary, the device shrinks the image
			slightly, depending on the size of the printable area on
			the paper.

18 Chapter 2 Control panel ENWW