Misformed characters
Figure
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
1.Print a few more pages to see if the problem corrects itself.
2.Make sure that the environmental specifications for the device are being met. See Operating environment on page 252.
Page skew
Figure
1.Print a few more pages to see if the problem corrects itself.
2.Verify that no torn pieces of media are inside the device.
3.Make sure that media is loaded correctly and that all adjustments have been made. See Load paper and print media on page 85. Make sure that the guides in the tray are not too tight or too loose against the media.
4.Turn over the stack in the tray. Also, try rotating the stack 180°.
5.Make sure that the type and quality of the media you are using meet HP specifications. See Supported paper and print media sizes on page 81.
6.Make sure that the environmental specifications for the device are being met. (See Operating environment on page 252.)
7.Perform a tray alignment by opening the Administration menu at the device control panel. On the Print Quality submenu, touch Set Registration. Choose a tray under Source and then run a test page. For more information, see Print Quality menu on page 42.
ENWW | Solve |